We've put together a simple video illustrating the 5 easy steps to installing your Image Group Pop Up Display System

Step 1 - Open the portable transit case - your spotlights can be stored safely and neatly in the lid

Step 2 - Remove the Pop Up Display frame from within the case - notice the hanging pins which should be orientated at the top and front of the stand once the frame is expanded. Magnetic locks ensure the frame is stable.

Step 3 - Remove 18 magnetic bars and apply to front and rear of the frame system. 12 bars sit on the front of the frame and 6 bars on the rear - 3 at the left and 3 at the right.

Step 4 - Roll out your pop up graphics on a clean dry surface. Hang the 3 centre panels to begin with starting with the left hand panel. When hanging this first graphic make sure the edge of the panel is aligned with the vertical mark on the magnetic bar. if this panel is aligned correctly the rest of the panels fall into place properly.

Next intall your 'D' end panels - locate the graphic on the front peg first - wrap around and locate the graphic on the rear peg - repeat the process for the second panel.

Step 5 - Finally install your spotlights using the plastic frame fittings provided - plug in and hey presto your stand is complete!

If that all seems a bit hard to follow - why not re-run the video... They do say "A picture speaks a thousand words"


Back to previous page >